Instructions for Using CoverWell™ Imaging Chamber
EMS #70327-05 to 70327-28
Peel off protective liner on gasket surface and place the CoverWell on a flat dry surface GASKET SIDE UP. Aliquot a small amount of mounting medium onto the chamber surface. Place specimen into the medium and fill the remaining chamber area with additional medium.
Place a microscope slide or coverslip above the chamber surface. Lower to make contact with gasket.
Press gently but firmly on the GLASS to seal.
CoverWells are Intended for Laboratory Use Only.
User Protocols Cleaning Instructions:
We recommend rinsing chambers with distilled water immediately after each use followed by a brief, 5 minute soak in a solution of cell culture grade detergent, followed by repeated rinsing with diH2O. Do not use bleach as the silicone may absorb this solution.
After air-drying, chambers should be stored at room temperature.
Just before use, remove particulates from the chamber surface using scotch tape.