French Flag   chineseFlag   japaneseFlag   germanFlag   SpanishFlag   argentinaFlag   mexicoFlag   russianFlag

View Cart || Request a 2017 Catalog

Electron Microscopy Sciences

Technical Data Sheets

Aron Alpha®, Type 200 – Ethyl Ultra Speed Adhesive (Quick Bond)

EMS #72588

Quick-Bond is an adhesive for general use in bonding applications. It is a standard, low-viscosity type. It is engineered for tough-to-bond situations and has an ultrafast setting formula that is excellent for porous surfaces

Instructions

Clean the surfaces to be bonded and apply Aaron Alpha 200. We recommend applying the product to only one of the surfaces to be bonded, preferably the small surface on which the Aaron Alpha 200 set time is longer.

Please note that applying too much of the product may damage the appearance of the bonded material – avoid. In addition, it may bring about chlorosis or solvent cracks, or it may harden before the bonding starts, which will weaken bond strength significantly.

We suggest that the nozzle of the container touches the surface to be bonded so that the required amount can be applied. Immediately following, bring the two surfaces together and allow the Aaron Alpha 200 monomer to disperse among the two surfaces. Spreading the monomer by rubbing it is not necessary.

Aaron Alpha 200, if kept in the shape of a mount on the surface, does not harden for 5 to 10 minutes and maintains significant bond strength.

Applications

Can be used for bonding wood, for use on artificial marble, is able to confirm the coating colors of adhesives, and for use in removing hardened substances and peel off parts of adhesives.

Technical Information

Specifications

Color Clear
Gap Fill 0.002"
Tensile Shear Strength (Steel) 4600 psi
Temperature Range -65°F to +180°F
Set Time (Steel) 15 s
Bonding Strength to Metal Good
Bonding Strength to Electroplating Good
Bonding Strength to Rubber Good
Bonding Strength to Plastic Good
Set Time (PVC) 5 s
Set Time (ABS) 15 s
Set Time (Polycarbonate) 10 s
Set Time (Chroloprene) 1 s
Set Time (EPDM) 1 s
Set Time (Steel) 15 s
Set Time (Aluminum) 15 s
Tensile Strength (PVC) 35 N/mm2
Tensile Strength (ABS) 25 N/mm2
Tensile Strength (Iron) 32 N/mm2
Tensile Strength (Aluminum) 25 N/mm2
Tensile Shearing Strength (Polycarbonate) 7 N/mm2
Tensile Shearing Strength (Chroloprene) 0.6 N/mm2
Tensile Shearing Strength (EPDM) 0.6
Form of Packing (2g x 5 pieces) Good
Form of Packing (20g) Good
Form of Packing (50g) Good
Form of Packing (100g) Good
Form of Packing (500g) Good
Tensile Strength 0.5 x 0.5 x 1.5 inch
Bonded area 0.25 sq. inch
Tensile Shear Strength (for plastic and rubber) 0.1 x 1.0 x 4.0 inch
Bonded area 0.5 sq. Inch
Tensile Shear Strength (for metal) 0.064 x 1.0 x 4.0 inch
Bonded area 0.5 sq. inch
Bonding Atmosphere 22-24°C
72-75°F
Relative Humidity 58-62%
Testing Methods ASTM D2095, D3164, and D1002

After Curing

Appearance (Solid State) Colorless and Transparent
Specific Gravity (d20)-(Solid State) 1.2483
Hardness (Rockwell M)-(Solid State) 85
Softening Point (Vicat)-(Solid State) 145°C
293°F

Storage

Be sure to store the product in the unopened container in a dry location.

Humidity

  • Avoid moist, humid storage conditions
  • Fasten cap tightly to avoid exposure to moisture
  • Store with desiccant

Setting Time (in seconds for various materials)

Material Setting Time (sec)
(Substrate material bonded to substrate material) 200
PVC (Rigid)/PVC 5
PMMA (Polymethylmetacrylate)/PMMA 10
ABS (Acrylonitrile butadiene styrene)/ABS 15
PC (Polycarbonate)/PC 20
Natural Rubber/Natural Rubber 5
Steel/Steel 15
Copper/Copper 3
Phenolic Resin/Phenolic Resin 5
Rigid PVC/Steel 15
Aluminum/ABS 15
Phenolic Resin/Copper 5
Neoprene Rubber/Steel 10
Neoprene Rubber/ABS 20

Bonding Strength (tensile)

Material Tensile Strengths (psi)
(Substrate material bonded to substrate material) 200
PVC (Rigid)/PVC 4980
PMMA (Polymethylmetacrylate)/PMMA 4980
ABS (Acrylonitrile butadiene styrene)/ABS 3560
PC (Polycarbonate)/PC 4980
Natural Rubber/Natural Rubber 360
Steel/Steel 4550
Copper/Copper 4980
Phenolic Resin/Phenolic Resin 4980
Rigid PVC/Steel 2560
Aluminum/ABS 2130
Phenolic Resin/Copper 3560
Neoprene Rubber/Steel 360
Neoprene Rubber/ABS 360

Bonding Strength (shear), (shear measures in psi for various materials)

Material Shear Strengths (psi)
(Substrate material bonded to substrate material) 200
PVC (Rigid)/PVC 1000
PMMA (Polymethylmetacrylate)/PMMA 710
ABS (Acrylonitrile butadiene styrene)/ABS 710
PC (Polycarbonate)/PC 1000
Natural Rubber/Natural Rubber 70
Steel/Steel 2840
Copper/Copper 2990
Phenolic Resin/Phenolic Resin 1000
Rigid PVC/Steel 1000
Aluminum/ABS 710
Phenolic Resin/Copper 1000
Neoprene Rubber/Steel 70
Neoprene Rubber/ABS 70

Product Information

Aron Alpha®, Type 200 – Ethyl Ultra Speed Adhesive (Quick Bond)