Laboratory and Diagnostic Mailing Systems

ThermoSafe® Diagnostic Shipper

Diagnostic Specimen Mailing Systems

These ready-to-use combination/triple packaging kit, have been tested and certified for transport of diagnostic shipments as defined by the applicable regulations, in compliance with IATA Packaging Instruction 650, US, Postal Service and DOT regulations.

Each kit includes:

• approved 10 ml specimen tubes
• leak-resistant foam shippers that secure and protect 95 kPa-certified specimen tubes
• absorbent material – sufficient to absorb complete contents of approved primary receptacles filled with blood
• waterproof tape
• leak-proof pressure-lock poly bag
• corrugated shipping carton
• UN3373 Biological Substance label and step-by-step instruction sheet.

Model 473 outer dimensions: 5⅝" x 4" x 2"; model 472 outer dimensions: 10½" x 5⅝" x 3"

EMS #	Model	Holds	Qty	Price
61510-73	473	3 x 10 ml tubes	3 sets	22.00	Add to Cart
61510-72	472	8 x 10 ml tubes	5 sets	76.00	Add to Cart

Replacement Parts and Accessories

61510-76	For Model 473: Model 476 EPS mailer – 3 tube specimen mailer foam	3	6.50	Add to Cart
61510-70	For Model 472: Model 470 EPS mailer – 8 tube specimen mailer foam	10	41.00	Add to Cart
61510-71T	For model 472: Model 471T accessory pack	5 sets	39.50	Add to Cart

Flexible Mailers (Without Tubes)

Complies fully with US Postal Service, DOT and IATA regulations for transport of clinical and diagnostic specimens (UN3373) by air or ground; Domestic Mail Manual Part 8.6; Title 49 CFR, Part 173, 199; and IATA Packing Instruction 650. Includes all required secondary and outer packaging components. Users provide only leak-proof specimen containers (primary receptacles), such as tubes, vials, cups, etc. Accommodates any size and quantity of specimen containers that fit inside the flexible secondary envelope with required absorbent material. Maximum capacity is 300 ml or less.

EMS #	61512-70	61512-75
Model	570	575, accessories kit for Model 570
Corrugated Carton	4" x 4" x 9½" I.D.	N/A
Plastic Envelope	1 – printed with international biohazard 5¼" x 8¾" I.D., 6" x 9 ⅜" O.D. 95 pKa (14psi)	95 kPa Plastic Bag, 25/case
Absorbent Sheets	2 – 7½" x 4⅝" 240 ml capacity	4 Bay 6¾" x 4⅞", 50/cs
Bottle Wrap 6" x 24"	1	25/case
Qty	5	Case
Price/set	42.00	107.00
	Add to Cart	Add to Cart

Medical Vial Mailing Box

These medical vial mailing boxes are specially designed with foam padding on the inside for safe and secure transit of standard size medical vials.

Available in 3 sizes for 1cc (ml) through 10cc (ml) medical vials:

Small: 4" x 2-7/16" x 1-3/16"
Medium: 4⅜" x 3⅛" x ⅞"
Large: 4¾" x 3" x 1⅜"

61540-01	Medical Vial Mailing Box, Small	each	5.00	Add to Cart
61540-02	Medical Vial Mailing Box, Medium	each	6.00	Add to Cart
61540-03	Medical Vial Mailing Box, Large	each	7.00	Add to Cart

Parafin Block Storage Box

Sturdy, low-cost, corrugated construction protects tissue blocks and organizes specimens

A low-cost alternative to expensive plastic storage containers. The sturdy corrugated construction protects tissue blocks and organizes specimens. Includes tray, slide sleeve, partition and dividers. Ships and stores flat until ready to use.

Measures 17½" x 9⅞" x 1-13/16"

61541

Parafin Block Storage Box

each

15.00

Add to Cart

LabMailer ThermoSafe®

Maximum breakage protection for known non-hazadous blood, serum, tissue, and other specimens. Accommodates VacuTainer® Microtainer® and other collection / transport tubes. Available in multi-tube, slide, and tube / slide combinations Lightweight polystyrene foam construction saves postage. Reusable and recyclable.

VacuTainer® and Microtainer® are trademarks of Becton Dickenson.
ThermoSafe® is a trademark of Tegrant Corporation, ThermoSafe Brands.

61515-56	61515-62	61515-64	61515-07
61515-39	61515-09	61515-41	61515-69

Drug Test Kit Mailer

All in one, easy to use drug test mailing system that meets postal and courier service regulations for non-hazardous clinical specimens. Kit consists of:

Model 600

• 90 ml Specimen Bottle, Screw Top Cap and Temperature Indication Label 1¾" dis. x 3"
• Pad of Absorbent Material 4" x 2¾"
• Press-Lock Plastic Bag 5⅞" x 9 ⅜"
• Model 601, I.D. 6" x 3" x 2½"; O.D. 7" x 4" x 3½", ½" Wall
• Model 602, I.D. 6" x 3" x 2½"; O.D. 7" x 4" x 3½", ½" Wall
• Security Seal 7" long x 1" wide

Cat. #	Description	Qty	Price
61514-00	Model 600 Drug Test Kit Mailer	10	70.00	Add to Cart

Mailing Sleeves

Sturdy 18-point white paperboard sleeves increase the cost-effectiveness of foam mailers. Reverse tuck closures enable foam mailers to withstand multiple trips.

EMS #	Model	Fit Foam Mailer	Qty / Pk	Price
61516-57	357	356	10	5.25	Add to Cart
61516-63	363	362	10	6.00	Add to Cart
61516-40	340	364, 339, 394	10	6.00	Add to Cart
61516-65	365	364, 339, 394	10	6.00	Add to Cart
61516-08	408	407	10	16.00	Add to Cart
61516-42	342	341	10	11.00	Add to Cart

Aluminum Cans and Can Shippers

Accommodates the most widely used laboratory collection tubes, vials, and bottles. Helps to prevent breakage during handling and shipment. Seamless construction with lined screw-cap to prevent leakage. Completely autoclavable. EPS foam mailers and mailing sleeves available.

Can Ordering:

EMS #	Model	Can Dimensions	EPS Mailer	Qty / Pk	Price
61517-35	435	1¾" dia. X 4" H	373	12	73.00	Add to Cart
61517-36	436	2½" dia. X 6" H	353	5	35.00	Add to Cart

EPS Foam Mailer Ordering:

EMS #	Model	Cavity Measures	Outer Measures	Qty / Pk	Price
61518-73	373	2" dia x 5½"	6¼ x 3¼ x 3 1/16"	10	12.50	Add to Cart
61518-53	353	2¾" dia x 7"	4 x 4 x 8½"	10	21.00	Add to Cart

Vial Shippers

This unique array of shipping system protects frozen and refrigerated shipping vials. These ready-to-use kits include everything to keep temperature sensitive goods in top condition. Just load your product, add U-tek®phase change material pack, and close the shipper.

Shippers (Model 480-413)	Shippers (Models 413-C24)
EPS container & lid 24oz, U-tek®phase change material reusable polyethylene platform corrugated shipping carton	EPS container & lid corrugated shipping carton 24-hole flexible foam insert

EMS #	Model	Holds	Dimensions		Qty / Pk	Price
			Inner L" x W" x H"	Outer L" x W" x H"
61519-13	480-413	12 of 28 mm vials	8" x 6" x 7"	11"x9"x10"	2	54.00	Add to Cart
61519-24	413-C24	24 of 16-20mm vials	8" x 6" x 7"	11" x 9" x 10"	2	52.00	Add to Cart

Mini Mailers for Temperature Sensitive Shipment

• Compact protection for temperature sensitive shipments, ideal for serums, tissues, and reagents
• Accommodate tubes, vials, ampoules, small bottles, and tissue flasks with space for refrigerants
• Insulating, thick wall polystyrene foam construction
• Walls on model 440 are 1" thick; walls on model 312 are 1½" thick.

EMS #	Model	Dimensions		Wall Thickns	Qty / Pk	Price
		Inner	Outer
61520-40	440	5⅞" x 4⅜" x 3"	8" x 6"x ¼"	1"	12	59.00	Add to Cart
61520-12	312*	6½" dia x 4" high	9½ x 9½x 6⅞"	1½"	4	64.00	Add to Cart

*Model 312 is in corrugated carton.

Mini Mailer / U-tek® Economy Packs

EMS #	Model	Holds	Qty	Price
61521-43	443	Model 440 Mini Mailer and Model 432 U-tek® refrigerant packs -23°C (-10°F)	6	40.00	Add to Cart
61521-44	444	Model 440 Mini Mailer and Model 429 U-tek® refrigerant packs -1°C (+30°F)	6	42.00	Add to Cart

More Mini Mailers and Accessories

• Maximum breakage protection for non-hazardous laboratory specimens. Ideal for biological, environmental, research and development, public health, industries hygiene, and veterinary use
• Accommodate tubes, vials, bottles, petri dishes and cans
• Lightweight polystyrene foam construction saves postage
• Reusable and recyclable
• Standard mailing sleeves available

61522-34	61522-35	61522-05	61522-01

EMS #	Model	Holds	Cavity Dimensions	Mailing Sleeve	Qty/Pk	Price
61522-34	334	Cans, screw cap vials, tube, swabs, air filter cartridges	8" x 2¼" x 1½"	392	10	18.00	Add to Cart
61522-35	335	Specimen tubes, vials, swabs	5 ⅞" x 1½" x 1½"	336	10	16.00	Add to Cart
61522-02	402	Tubes, vials, cans, bottles. Can be used with Poly-Pad Foam cushion, to keep containers from shifting	4" x 3 ½" x 3¼"	372	10	20.00	Add to Cart
61522-04	404	10 standard petri dishes	6¼" x 3¾" x4"	403	12	24.00	Add to Cart
61522-01	601	Bottles, cans, vials, cups. Can be fitted with foam insert to hold small kit components	6" x 3" x 2½"	602	10	11.00	Add to Cart
61522-05	605	100 ml sample containers, 4oz urine cup	3¾" x 2¼' x 1½"	606	12	32.00	Add to Cart
61522-95	395	2 oz Boston round bottle	3¼" x 2" dia.	396	10	11.00	Add to Cart

Mailing Sleeves

EMS #	Model	Description	Qty	Price
61523-92	392	Mailing Sleeve for Model 334	10	10.00	Add to Cart
61523-36	336	Mailing Sleeve for Model 335	10	7.00	Add to Cart
61523-72	372	Mailing Sleeve for Model 402	10	11.00	Add to Cart
61523-03	403	Mailing Sleeve for Model 404	12	22.00	Add to Cart
61523-02	602	Corrugated Carton for Model 601	10	25.00	Add to Cart
61523-06	606	Mailing Sleeve for Model 605	12	10.00	Add to Cart
61523-42	442	Mailing Sleeve for Model 440	12	17.00	Add to Cart
61523-41	441	Poly-Pad for Model 440	12	8.00	Add to Cart
61523-96	396	Mailing Sleeve for Model 395	10	10.00	Add to Cart

DuraPorter® Sealed Specimen Sample Transport Box

The DuraPorter® translucent sealed specimen or sample transport tote is ideal for holding and storing a variety of laboratory equipment and samples, including

• Hazardous/sensitive research samples
• Clinical and Phlebotomy samples
• Blood bags and/or tissue/organ samples
• Public Health samples
• Laboratory instruments
• Biotransport carrier

Hospitals, field hospitals, sea ports, airports, clinical and research laboratories worldwide are experiencing a heightened focus on disease control. Help these establishments safely handle, store and transport potentially infectious specimens within the facility with the DuraPorter®.

The DuraPorter® is an easy-to-load, durable, waterproof, and leak-proof container that securely locks for transport. Available in clear, translucent yellow and translucent red, the DuraPorter® provides visibility for content identification and protection during sample transport.

Features

• Polycarbonate construction
• Silicone water-tight seal and three lid clasps provide secure closure
• Carry handle folds neatly into body space allowing the units to be stacked
• Lid opens a full 180°, allowing total access to contents and making it easier to clean
• Accommodates 13 and 16 mm tubes in a 72-place OneRack™, or similar sized/brand of rack
• Autoclavable
• Available in three colors for user/owner identification

The entire unit can be placed in a freezer or refrigerator if the enclosed samples need to be kept chilled. Included separators can also be used to create inner compartments. Or, use without racks or separators as one large storage space for larger samples or supplies.

The DuraPorter® is in compliance with U.S. standards, OSHA 29 CFR 1910.1030

62011-C	DuraPorter Specimen Transport Box, Clear	each	99.00	Add to Cart
62011-Y	DuraPorter Specimen Transport Box, Yellow	each	99.00	Add to Cart
62011-R	DuraPorter Specimen Transport Box, Red	each	99.00	Add to Cart

95 kPa Specimen Transport Bag

Specimen transport bags are liquid tight and tamper evident. The patented adhesive closure and continuous seal meet or exceed standards of all major air carriers and DOT. Polyethylene construction and adhesive closure provides added security during handling by personnel.

EMS#	Model	Description	Qty	Price
61525-52	952	Inside dimensions 9 x 12	25	128.00	Add to Cart
61525-54	954	Inside dimensions 13¼ x 17⅞	10	112.00	Add to Cart

ThermoSafe® Nylon Carrier

Tegrant Corporation, ThermoSafe Brands

Rugged lightweight totes ideal for transport of diagnostic and clinical specimens, even for field works. Washable, weather resistant nylon shell with thick-walled polystyrene foam insulation. Adjustable nylon carrying straps; for hand or shoulder carrying. Exterior may be printed with your facility name or company logo (by your own).

EMS #	61528-54	61528-55
Model	454	455
Volume Cu. ft.	0.82	0.96
Wall Thick	1½	2
Dimensions L" x W" x H"	17¼ x 10¼ x 8	12 x 12 x 11½
	20¼ x 13⅜ x 11	16 x 16 x 15½
Closure	Velcro®	Bayonet Style Clip
Empty Weight	3.0 lb	3.5 lb
Interior	Nylon	Nylon
Exterior color	Red	Red
Price / each	115.00	124.00
	Add to Cart	Add to Cart

U-tek® Blue-Ice

Superior protection for shipping temperature sensitive materials. Maintains critical temperatures of serums, test samples, live or frozen tissues, organs and pharmaceutical for extended periods. Laminated, metalized film exterior provides radiant heat barrier and resists punctures. U-tek® is ideal for products which require extreme cold but may not tolerance dry ice or CO2. Eliminate dry ice hazmat hassles.

EMS #	Model	Formula	Weight	Dimension L" x W" x H"	Qty	Price
61530-29	429	-1°C (+30°F)	8 oz	6 x 8 x ¾	6	12.00	Add to Cart
61530-12	412	-1°C (+30°F)	12 oz	6¾ x 4 x 1	6	13.00	Add to Cart
61530-96	596	-1°C (+30°F)	16 oz	6½ x 6½ x ⅞	4	10.00	Add to Cart
61530-14	414	-1°C (+30°F)	24 oz	7½ x 6½ x 1	4	14.00	Add to Cart
61531-32	432	-23°C (-10°F)	8 oz	6 x 4 x ¾	6	13.50	Add to Cart
61531-18	418	-23°C (-10°F)	12 oz	6¾ x 4 x 1	6	15.00	Add to Cart
61531-97	597	-23°C (-10°F)	16 oz	6½ x 6½ x ⅞	4	12.00	Add to Cart
61531-20	420	-23°C (-10°F)	24oz	7½ x 6½ x 1	4	12.50	Add to Cart

U-tek® Ice Packets

Cushion fragile shipments, won't dilute ice baths or damage samples. They remain frozen longer than regular ice without the melting mess.

• May be refrozen and reuse, withstands pressure of 60 lb per square inch for 5 minutes or longer
• Refrigerant contains neutral pH distilled deionized water and proprietary materials certified by the US Food and Drug Administration as food grade chemicals
• -1°C / +30°F

EMS #	Model	Style	Description	Qty	Price
61533-05	405	Mat	1 – 16" x 2 ft sheet	1 sheet	15.00	Add to Cart
61533-06	406J	Single	Individual Packet	100 packets	15.00	Add to Cart

ThermoSafe® Infectious Shipper

• Meet US Dept of Transportation (DOT) and IATA requirement for transporting infectious substances (UN2814 and UN 2900)
• 4 Models – Accommodate shipments from 4-60 6 tubes / vials
• Pre-assembled packaging includes everything needed for shipping infectious agents in accordance with DOT Regulation 49CFR Parts 171 to 178 and IATA Packaging Instructions 602.

Note: Compliance with UN/DOT regulations governing shipments of infectious substances in these approved shippers is contingent on the use of all supplied components. The shipper is ultimately responsible for determining the suitability of packaging for use with contents. Consult appropriate regulations.

"infecon is a Trademark of Com-Pac International, Inc.

Infectious Shipper – Model 630 is discontinued.

Use model INF3000 as a replacement.

Infectious Shipper – Model INF3000

Infectious shippers include pressure vessel with stop-lock lid, compartmentalized bubble pouch, 50 ml absorbent sheet, corrugate outer carton with required markings, shipper's declarations and easy-to-follow instructions.

Dry Ice Overpack – Model 670

Substance Shippers protect frozen samples for over four days. The EPS foam container and lid accommodates either Model 630 or Model 660B shipper plus 25 pounds of dry ice. Foam insert holds in place while dry ice sublimates. Includes one Class 9 Miscellaneous Dangerous Goods label (for dry ice) and shipping carton (Dry ice NOT included)

EMS #	61535-60B	61535-70	61535-10
Model	660B	670	INF 3000
Vessel Dimensions	Aluminum can, 3 x 6	N/A	1.0L transparent container
Internal Cushioning	Absorbent material, flexible pressure vessel & bubble wrap	EPS Insulated Shipper	Compartmentalized bubble pouch & foam insert
Capacity	Six 16x100mm tubes max. volume 60 ml	Overpack for Models 630 & 660B	Six tubes
Outer Measures L" x W" x H"	5½ x 5½ x 11¼	14 x 14 x 14⅝	6¼ x 6¼ x 7½
Additional Features	Flexible pressure vessel accepts various size tubes	Foam insert holds up to 25lbs of dry ice in place	Liquid tight container withstands up to 95kPa pressure; vessel is autoclavable for re-use
Qty	2	2	2
Price	70.00	64.00	64.00
	Add to Cart	Add to Cart	Add to Cart

ThermoSafe® Insulated Shipper

These shippers and containers offer the ideal solution for the safe storage and delivery of most refrigerated or frozen materials, including pharmaceuticals, laboratory specimens, serum and vaccines, human organs, culture packs, and nuclear and isotope materials.

When shipping dry ice or utilizing dry ice as a refrigerant, these shippers provide excellent dry ice sublimation – average dry ice usage in 1½ thick wall units is 5 lbs for the first 24 hours; 3-4 lbs thereafter.

EMS #	Model	Construction	Dimensions L" x W" x H"		Wall Thick-ness	Qty /pk	Price /pk
			Inner	Outer
61536-11	411	Foam Box only	8 x 5⅞ x 7	11 x 9 x 10	1½	2	30.00	Add to Cart
61536-41	413*	Foam & Carton	8 x 5⅞ x 7	11 x 9 x 10	1½	2	40.00	Add to Cart
61536-19	319	Foam Box only	8 x 5⅞ x 8⅞	11 x 9 x 11⅞	1½	2	30.00	Add to Cart
61536-21	321*	Foam & Carton	8 x 5⅞ x 8⅞	11 x 9 x 11⅞	1½	2	42.00	Add to Cart
61536-16	316	Foam Box only	8 x 6 x 4¼	11 x 9 x 7¼	1½	2	34.00	Add to Cart
61536-18	318*	Foam & Carton	8 x 6 x 4¼	11 x 9 x 7¼	1½	2	50.00	Add to Cart
61536-46	446	Foam Box only	10 x 10 x 7	14 x 14 x 10	1¾	1	19.00	Add to Cart
61536-48	448*	Foam &Carton	10 x 10 x 7	14 x 14 x 10	1¾	1	29.00	Add to Cart
61536-89	489	Foam Box only	11¾ x 10 x 5	15 x 13¼ x 9 x16	1½	1	18.00	Add to Cart
61536-90	490*	Foam & Carton	11¾ x 10 x 5	15 x 13¼ x 9 x16	1½	1	26.00	Add to Cart
61536-12	612	Foam Box only	12½ x 12½ x 9	15½ x 15½ x 12	1½	1	23.00	Add to Cart
61536-13	613*	Foam & Carton	12½ x 12½ x 9	15½ x 15½ x 12	1½	1	27.00	Add to Cart
61536-14	614	Foam Box only	12½ x 12½ x 12	15½ x 15½ x 15	1½	1	22.00	Add to Cart
61536-15	615*	Foam & Carton	12½ x 12½ x 12	15½ x 15½ x 15	1½	1	32.00	Add to Cart

*These foam box sets suit for shipping by UPS or other carriers.

ThermoSafe® Medical Transporter

Insulated expanded polypropylene medical transporter is ideal for on-site collection, storage, and transport of temperature sensitive specimens, medications, medical devices and organs.

• Durable nylon clad transporter
• Stain and impact resistant expanded polyethylene container
• Lightweight – ergonomic design
• Extra space for crushed ice and refrigerant gel pack
• Washable, weather-resistant.

Model 960

For mobile blood collection, cools and stores whole blood units and other temperature sensitive materials

• Qualified by ISC labs for temporary storage and transport of both platelet (20°C-24°C for up to 8 hours) and non-platelet production (1°C-10°C for up to 24 hours) whole blood with crushed wet ice.
• Includes operating instructions and test data for cooling platelet and non-platelet production blood.
• Volume: 1.60 cu. ft. and 1 wall thickness

Model 931, 932

Includes removable, rigid, thermoformed tray – ideal for washing and reusing; prevents leaking inside and out of transport unit, reinforced durability. Adjustable, durable carrying strap for shoulder transport. Model 932 also features a comfortable sturdy hand strap.

Model 931: 0.3 cu. ft volume and ⅜ wall thickness
Model 932: 0.53 cu. ft. volume and ⅜ wall thickness

Model 640, 641

Inner partition divides unit and separates specimens. Features built-in lid compartments for U-tek® refrigerant packs. Adjustable nylon carrying strap for hand or shoulder. Model 641 includes a vial foam insert that holds twenty four 5-15 ml vials and one model 418 U-tek®.
Volume is 0.30 cu. ft. with1/4 wall thickness.

EMS #	Model	Blood Unit Capacity	Dimensions L" x W" x H"		Empty Weight	Qty	Price
			Inside	Outside
61537-31	931	N/A	6 x 9 x 9½	6½ x 9¼ x 10¼	2 lbs	1	225.00	Add to Cart
61537-40	640	N/A	10¼ x 7¼ x 8	10¾ x 7¾ x 8½	1 lb	1	86.00	Add to Cart
61537-41	641	N/A	10¼ x 7¼ x 8	10¾ x 7¾ x 8½	1 lb	1	110.00	Add to Cart
61537-32	932	N/A	8¾ x 11 x 9½	9⅛ x 12¼ x 10¼	2 lbs	1	245.00	Add to Cart
61537-60	960	16	15¾ x 10¾ x 22¾	17¾ x 12¾ x 24¾	12.2 lbs	1	340.00	Add to Cart
61538	960 Dolly				4 lbs	1	210.00	Add to Cart

General Supplies for Specimen Preparation