Micro
Sieve Set
EMS Catalog #50110-00
Introduction
This micro-sieve set consists of a stack of four interchangeable screen-holding sections, a catch pan, and a friction-fit cover. The entire unit is molded of poly-propylene. All of the parts of the set are very easy to take apart for changing the mesh insert or for cleaning. Complete with the unit are phosphor-bronzed mesh inserts in the following sizes: 25, 35, 45, 60, 80, 120, 170, and 230 mesh. The holding sections are 2" (51 mm) ID x 6" (152 mm) H.
By using all 4 sections and 4 mesh screens, 5 particle sizes can be separated.
Eight mesh screens included, one each of 25, 35, 45, 60, 80, 120, 170 and 230 standard mesh.
Directions
- Select 4 sizes of mesh screen suitable for your material.
- Place the mesh screen inserts in the holding sections with the coarsest mesh in the top section and increasingly finer mesh sizes in lower sections.
- Assemble the screen retaining rings into all sections.
- Assemble the bottom pan to the lowest holding section.
- Fill the top section with the sample to be sieved.
- Assemble the top cover to the top section.
- Shake the entire unit for several minutes.
- Remove the bottom pan to obtain the finest particles.
- Check the other sections to determine percentage of each retained particle size.