Step Up™ Slide Warmer
EMS Catalog #71319-50 & 71319-250
Features
Our Step Up™ Slide Warmer's unique patent pending design helps you save space while still meeting a busy lab's needs. The slide warmer is the ideal choice for scientific research organizations, professional laboratories and high
school labs (grades 11 and up). Applications include biological, cytological and histological fields.
The Premiere Step Up™ Slide Warmer has many advantages in unique design:
Safety
Please read this Technical Data Sheet completely and carefully before using. Injury to users or damage to equipment may result if this equipment is not used correctly or appropriately.To avoid injuries to personnel and/or separated samples inside the unit, do not use the following materials in the centrifuge:
To prevent fire or shock hazard:
While in the slide warmer is heating up and also in use:
Set Up
Please note the following conditions/guidelines for safe operation of the Step Up™ Slide Warmer:
- Open box and remove Step Up™ Slide Warmer from package.
- Place Step Up™ Slide Warmer on a flat surface.
- Flip back legs UP to allow slide warmer to stand.
- When ready to use, plug AC power cord firmly into back of unit and connect to power supply.
Specifications
Capacity | 40 – 3" x 1" slides |
Temperature range | Room temperature to 90°C ±2°C |
Power requirements | AC 110V |
60Hz (CAT. 71319-50) 220V | |
50Hz (CAT. 71319-250) | |
Time setting range | 1 – 240 minutes |
Overall size | 14" x 14" x 4"H |
Shipping weight | 22 lb |
Net weight | 18 lb |
Precautions Before Operating
Please note the following conditions/guidelines for safe operation of the Step Up™ Slide Warmer:- Ensure area and unit are clean, dry, and well ventilated.
- Unit must be on a flat, stable work surface
- Relative humidity needs to be ≤80%
- Always use with care
- Avoid moving or touching unit during operation
- Use only with parts designed specifically for this model or the accessories provided
- While unit is on, DO NOT touch surface without proper protection.
- DO NOT use any item on the slide warmer that could scratch or damage its surface
- Use only the electrical plug supplied with the product
- NEVER leave the unit unattended while in use
- DO NOT store unit in direct sunlight
- Long hair should be pulled back and secured
- Do not wear loose clothing or jewelry while operating unit
- NOTE: Equipment has no serviceable parts.
Control Panel
- Temperature display (in °C)
- Maximum Temperature requested by user (in °C)
- On/Heat = Unit is Warming/Hot
- Alarm = Operating Error
- Turn ON unit to run program cycle
- Turn OFF unit
- Increase/Decrease Temperature/Time
Directions for Use
- Plug in Step Up™ Slide Warmer into a standard 110V (or 220V, if applicable).
- Turn ON Power switch button on back of unit. The light above the word "ON" (located below "Set Temp LED Screen) will light to indicate unit is working. Temperature Display Box will light up to indicate the actual temperature (upper box) and the Set Temperature (lower box). This confirms the unit is on and operating.
- Adjust temperature by pushing the SET button one time. The top, larger display will read "SP". Use the Increase/Decrease buttons (∧ / ∨) to adjust temperature to desired setting. Once slide warmer reaches desired set temperature, the heat indicator light will turn off and is holding at temperature.
- Adjust time by pushing the SET button twice. The top, larger display will read "SR". Use the Increase/Decrease buttons (∧ / ∨) to adjust time setting to run for desired amount of time. Once set time is determined, unit will begin to heat until predetermined time is up. Two "beeps" will signal that the Step Up™ Slide Warmer will completely shut off. NOTE: To run unit continuously, set time to "0".