French Flag   chineseFlag   japaneseFlag   germanFlag   SpanishFlag   argentinaFlag   mexicoFlag   russianFlag

View Cart || Request a 2018 Catalog

Electron Microscopy Sciences

Technical Data Sheets

Vortex Genie Shock Absorbing Feet

EMS Catalog #71842-51

Introduction

These shock absorbing feet with screws are for the Analog and Digital Vortex Genie® 2 & Vortex Genie® 2T (Catalog #71838 Series).

Installation

  1. Unplug the mixer from any electrical outlet.
  2. Remove any one of the bottom corner screws, leaving the remaining three in place.
    Note: Do not remove all four screws, to avoid exposing internal components.
  3. Replace with the new screw and foot. Do not over tighten.
  4. Repeat steps 2 and 3 for remaining three screws and feet.
  5. Your Vortex-Genie® 2 mixer may have the older style rubber strips for feet – one strip in the front and one in the back – if it does, these strips should be removed after the new feet are installed.

Product Information

Vortex Genie Shock Absorbing Feet