French Flag   chineseFlag   japaneseFlag   germanFlag   SpanishFlag   argentinaFlag   mexicoFlag   russianFlag

View Cart || Request a 2018 Catalog

Electron Microscopy Sciences

Technical Data Sheets

EMS Mortexer™ Vortex Mixer

EMS #87002-03 to 87002-05

Introduction

The EMS Mortexer™ Vortex Mixer is a compact, powerful, vortex mixer designed for vortexing micro tubes of all sizes. Dynamic balance technology provides smooth speed control and quiet operation with minimal vibration.

Set Up

Place the vortex mixer on a clean, flat, stable surface and press down slightly to allow the suction cup feet to adhere. Make sure that the mode switch is in the OFF position and plug the vortex mixer into a properly grounded outlet. Using the SPEED control knob, adjust the mixing speed to the desired setting. Start at the middle of the speed range if you are uncertain of what setting you need. Check that the cup head is securely fastened by gently rotating it clockwise.

Operation

Set the mode switch to the desired setting of ON (continuous mixing) or TOUCH. In touch mode the tube to be mixed is pressed downward against the head to activate the vortex mixing action. Touch the tube to be mixed to the head and observe the vortex mixing action. Adjust the SPEED knob to obtain more or less vortex mixing action.

Care and Maintenance

No routine maintenance is required other than to keep the unit clean. Cleaning can be done with a damp cloth. Avoid the use of solvents as they may attack the rubber cap head or the ABS plastic housing. Do not immerse the mini vortexer in liquid or subject it to temperatures outside of the recommended operating range.

In the event that service or technical support is required, please contact Electron Microscopy Sciences at 1-800-523-5874.

Specifications

Speed Range 200 to 3400 rpm
Operating Modes Touch or Continuous
Operating Temperature Range +4°C to +65°C
Dimensions 5 (W) x 6.3 (D) x 6.7 (H)"
13 x 16 x 17 cm
Weight 8.4 lbs (3.8 kg)
Electrical 115V, 60Hz, 1.5A
230V, 50-60Hz, 0.75A
Warranty 2 years

Accessory Heads

A wide variety of accessory heads are available including a Flat Head for multiple tube mixing, a Combo Head which holds up to 60 small tubes or one micro plate.

87002-06 87002-07 87002-08 87002-09 87002-10

Product Information

EMS Mortexer™ Vortex Mixer